Data Storage Converter

Convert digital storage between bytes, kilobytes, megabytes, gigabytes, terabytes, and bits. Enter a value, pick the unit you are converting from and the unit you want, and see the result instantly.

0.000977

1 Megabytes = 0.000977 Gigabytes

Who should use it: Developers, IT professionals, and anyone comparing file sizes, memory, or disk capacity.

How to use this calculator

  1. 1Enter the storage amount to convert.
  2. 2Select the unit you are converting from.
  3. 3Select the unit you want to convert to, or tap the swap button to reverse the direction.
  4. 4Read the converted value.
  5. 5This converter uses the binary convention (1024), matching how operating systems report sizes; storage manufacturers use decimal (1000), so a sold “1 TB” drive shows about 931 GB here.

Understanding the inputs

ValueThe storage amount to convert, in the "From" unit.
From unitThe unit your value is currently in. Supported units include bytes, kilobytes, megabytes, gigabytes, terabytes, and bits.
To unitThe unit you want the result in. Use the swap button to exchange "From" and "To" instantly.

How the calculation works

Every storage amount is first converted to a base unit (bytes) using a binary conversion factor, then converted from bytes to the target unit. This calculator uses the binary convention where each step is a factor of 1024 (1 KB = 1024 bytes), the convention used by operating systems and memory.

value_in_bytes = value × factor_to_bytes; result = value_in_bytes ÷ factor_to_target

Worked example

Scenario: Convert 1 gigabyte to megabytes.

Result: 1 GB × 1024 = 1024 MB.

How to interpret your result

The result is the same storage amount expressed in a different unit. It is useful when a file size or disk capacity is given in a unit you do not normally use, such as a download in megabytes versus a quota in gigabytes. Because the conversion uses fixed factors, the only loss of precision comes from rounding the displayed value.

Factors that can affect the result

  • Binary convention: this converter uses factors of 1024 (1 KB = 1024 bytes, 1 MB = 1024² bytes, 1 GB = 1024³ bytes, 1 TB = 1024⁴ bytes), matching how operating systems and memory report sizes.
  • Bits vs bytes: 1 byte = 8 bits, so the bit factor is 0.125 bytes; network speeds are often quoted in bits while storage is quoted in bytes.
  • Rounding: the displayed result is rounded; full precision is kept internally.

Limitations and assumptions

  • Uses the binary convention (1024) throughout; it does not use the decimal convention (1000) employed by storage manufacturers, where 1 GB = 1,000,000,000 bytes. A "1 TB" drive formatted in binary units shows about 931 GB here.
  • Supports bytes through terabytes and bits only; petabytes and larger units are not included.
  • This tool converts storage capacity only; it does not measure data transfer speed or bandwidth.

Frequently asked questions

Related calculators

Methodology

All storage units are defined by a fixed binary conversion factor to the byte (1 KB = 1024 bytes, 1 MB = 1024² bytes, and so on). The calculator multiplies the input by its unit's factor to get bytes, then divides by the target unit's factor to produce the result. The bit is defined as 1/8 of a byte.

Sources and references

Last reviewed: August 2026. Read our editorial policy.

Disclaimer: Results are provided for informational purposes and may vary depending on the values entered, the assumptions described above, and rounding. They are not a substitute for professional advice specific to your situation. Read the full disclaimer.