Speed Converter
Convert speed between meters per second, kilometers per hour, miles per hour, knots, and feet per second. Enter a value, pick the unit you are converting from and the unit you want, and see the result instantly.
1 Km/h = 0.621372 Miles/h
Who should use it: Drivers, pilots, sailors, runners, and anyone comparing speed readings across metric and imperial systems.
How to use this calculator
- 1Enter the speed to convert.
- 2Select the unit you are converting from.
- 3Select the unit you want to convert to, or tap the swap button to reverse the direction.
- 4Read the converted value.
- 5Knots are nautical miles per hour, used in aviation and maritime contexts — pick the unit that matches the reading you have.
Understanding the inputs
| Value | The speed to convert, in the "From" unit. |
| From unit | The unit your value is currently in. Supported units include meters per second, kilometers per hour, miles per hour, knots, and feet per second. |
| To unit | The unit you want the result in. Use the swap button to exchange "From" and "To" instantly. |
How the calculation works
Every speed is first converted to a base unit (meters per second) using a fixed conversion factor, then converted from m/s to the target unit. Converting through a common base unit keeps results consistent across all supported units.
Worked example
Scenario: Convert 100 km/h to miles per hour.
Result: 100 km/h ÷ 1.609344 = 62.14 mph.
How to interpret your result
The result is the same speed expressed in a different unit. It is useful when a speed limit, vehicle speedometer, or weather report uses a unit you do not normally use, such as a European limit in km/h versus a US limit in mph. Because the conversion uses fixed factors, the only loss of precision comes from rounding the displayed value.
Factors that can affect the result
- Unit system: metric units (meters per second, kilometers per hour) and imperial units (miles per hour, feet per second) use different base definitions; knots are a maritime/aviation unit based on nautical miles per hour.
- Conversion factor: each unit has a fixed factor relative to meters per second; for example, 1 km/h = 1000/3600 ≈ 0.277778 m/s and 1 mph = 0.44704 m/s.
- Rounding: the displayed result is rounded; full precision is kept internally.
Limitations and assumptions
- Supports meters per second, kilometers per hour, miles per hour, knots, and feet per second only; other units such as Mach or feet per minute are not included.
- Some factors (km/h, knots) use rounded constants, so very high-precision work may show tiny rounding differences.
- This tool converts speed readings only; it does not compute acceleration or distance over time.
Frequently asked questions
Related calculators
Methodology
All speed units are defined by a fixed conversion factor to meters per second. The calculator multiplies the input by its unit's factor to get m/s, then divides by the target unit's factor to produce the result. Factors follow the international definitions for metric, imperial, and nautical speed units.
Sources and references
- NIST — Metric and SI unit conversions — authoritative metric and imperial speed conversion factors
Disclaimer: Results are provided for informational purposes and may vary depending on the values entered, the assumptions described above, and rounding. They are not a substitute for professional advice specific to your situation. Read the full disclaimer.