Length Converter

Convert lengths between metric and imperial units — meters, kilometers, miles, feet, inches, centimeters, and more. Enter a value and instantly convert it to any other supported unit.

3.28084

1 Meters = 3.28084 Feet

Who should use it: Travelers, students, engineers, and anyone switching between metric and imperial measurements.

How to use this calculator

  1. 1Enter the length you want to convert.
  2. 2Choose the unit you are converting from.
  3. 3Choose the unit you want to convert to, or tap the swap button to reverse the direction.
  4. 4Read the converted value.
  5. 5For area or volume, switch to the Area or Volume converter instead — those factors are squared or cubed, not simple length multiples.

Understanding the inputs

ValueThe length you want to convert, in the "From" unit.
From unitThe unit your value is currently in. Supported units include meters, kilometers, centimeters, millimeters, miles, yards, feet, inches, and nautical miles.
To unitThe unit you want the result in. Use the swap button to exchange "From" and "To" instantly.

How the calculation works

Every length is first converted to meters using an exact conversion factor, then converted from meters to the target unit using its factor. Converting through a common base unit keeps results consistent across all supported units, which include metric units (meters, kilometers, centimeters, millimeters), imperial units (miles, yards, feet, inches), and nautical miles.

value_in_meters = value × factor_to_meters; result = value_in_meters ÷ factor_to_target

Worked example

Scenario: Convert 5 miles to kilometers.

Result: 5 miles = 8.047 km ≈ 8.05 km.

How to interpret your result

The result is the same physical length expressed in a different unit. It is useful when a measurement is given in a system you do not normally use, such as a European height in centimeters or a US road distance in miles. Because the conversion uses exact factors, the only loss of precision comes from rounding the displayed value.

Factors that can affect the result

  • Unit system: metric and imperial units use different base lengths, so always confirm which system a value came from.
  • Conversion factor: each unit has a fixed factor relative to the meter; nautical miles use their own factor of 1,852 meters.
  • Rounding: the displayed result is rounded; full precision is kept internally.

Limitations and assumptions

  • Results are rounded for display; very small or very large values may show limited precision.
  • Specialized units such as survey feet or light-years are not included.
  • This tool converts length only; area and volume need their own squared and cubed factors.

Frequently asked questions

Related calculators

Related guides

Methodology

All length units are defined by a fixed conversion factor to the meter. The calculator multiplies the input by its unit's factor to get meters, then divides by the target unit's factor to produce the result. Factors follow the international definitions for metric and imperial units.

Sources and references

Last reviewed: August 2026. Read our editorial policy.

Disclaimer: Results are provided for informational purposes and may vary depending on the values entered, the assumptions described above, and rounding. They are not a substitute for professional advice specific to your situation. Read the full disclaimer.