Angle Converter
Convert angles between degrees, radians, gradians, and turns. Enter a value, pick the unit you are converting from and the unit you want, and see the result instantly.
1 Degrees = 0.017453 Radians
Who should use it: Students, engineers, programmers, and anyone working with angles across mathematical and surveying units.
How to use this calculator
- 1Enter the angle to convert.
- 2Select the unit you are converting from.
- 3Select the unit you want to convert to, or tap the swap button to reverse the direction.
- 4Read the converted value.
- 5A full circle is 360 degrees, 2π radians, 400 gradians, or 1 turn — choose the unit that matches your field (radians for math, gradians for surveying).
Understanding the inputs
| Value | The angle to convert, in the "From" unit. |
| From unit | The unit your value is currently in. Supported units include degrees, radians, gradians, and turns. |
| To unit | The unit you want the result in. Use the swap button to exchange "From" and "To" instantly. |
How the calculation works
Every angle is first converted to a base unit (degrees) using a fixed conversion factor, then converted from degrees to the target unit. A full circle is 360 degrees, 2π radians (about 6.283), 400 gradians, or 1 turn, so all units are linked through the circle.
Worked example
Scenario: Convert 1 radian to degrees.
Result: 1 rad × 57.29578 ≈ 57.296°.
How to interpret your result
The result is the same angle expressed in a different unit. It is useful when an angle is given in a unit you do not normally use, such as a calculus problem in radians versus a compass bearing in degrees. Because the conversion uses fixed factors, the only loss of precision comes from rounding the displayed value.
Factors that can affect the result
- Full circle: 360 degrees = 2π radians (≈ 6.28319) = 400 gradians = 1 turn, so all units are linked through the circle.
- Conversion factors: 1 radian = 180/π ≈ 57.29578°; 1 gradian = 0.9°; 1 turn = 360°.
- Rounding: the displayed result is rounded; full precision is kept internally.
Limitations and assumptions
- Supports degrees, radians, gradians, and turns only; other units such as arcminutes, arcseconds, or mils are not included.
- The radian factor (57.29578°) is a rounded value of 180/π, so very high-precision work may show tiny rounding differences.
- This tool converts angle measures only; it does not compute trigonometric functions or angular velocity.
Frequently asked questions
Related calculators
Methodology
All angle units are defined by a fixed conversion factor to the degree, linked through the full circle (360° = 2π rad = 400 grad = 1 turn). The calculator multiplies the input by its unit's factor to get degrees, then divides by the target unit's factor. The radian factor uses 180/π ≈ 57.29578.
Sources and references
- NIST — Metric and SI unit conversions — radian (SI derived unit) and angle unit definitions
Disclaimer: Results are provided for informational purposes and may vary depending on the values entered, the assumptions described above, and rounding. They are not a substitute for professional advice specific to your situation. Read the full disclaimer.