Concrete Calculator

Estimate how much concrete you need for a slab, footing, or column pour. Enter your dimensions to get cubic yards, cubic feet, bag counts, and an estimated ready-mix cost, with a waste allowance built in.

Concrete needed

1.36 yd³

33.3 ft³ raw volume, waste included

Cubic feet

33.3 ft³

60 lb bags

82

80 lb bags

62

Est. ready-mix cost

$203.70

Who should use it: DIYers and contractors estimating concrete for a slab, footing, or cylindrical column or tube form.

How to use this calculator

  1. 1Choose the pour shape: slab, footing, or column/tube.
  2. 2Enter the dimensions for the selected shape.
  3. 3Enter the number of pours, a waste or overage percentage, and the price per cubic yard.
  4. 4Review the concrete needed in cubic yards, plus cubic feet, bag counts, and estimated cost.

Understanding the inputs

Pour shapeThe shape of the pour: slab (length × width × thickness), footing (long narrow trench), or column/tube (cylinder).
DimensionsSlab uses length and width in feet and thickness in inches. Footing uses length in feet, width in inches, and depth in inches. Column uses diameter in inches and height in feet.
Number of poursHow many identical pours you are making; the volume is multiplied by this number.
Waste / overageA percentage added to the volume to cover spillage, uneven subgrade, and form imperfections. A 5–10% overage is common.
Price per cubic yardThe ready-mix price per cubic yard, used for the estimated cost.

How the calculation works

The calculator computes the raw volume for the selected shape, converts inches to feet where needed, and multiplies by the number of pours. It converts cubic feet to cubic yards by dividing by 27, then adds the waste percentage. Bag counts are estimated from typical yields (about 0.45 cubic feet per 60 lb bag and 0.6 cubic feet per 80 lb bag), and the ready-mix cost is the waste-adjusted cubic yards multiplied by the price per yard.

Volume (slab) = length × width × (thickness ÷ 12); (footing) = length × (width ÷ 12) × (depth ÷ 12); (column) = π × (diameter ÷ 24)² × height. Cubic yards = (volume × pours ÷ 27) × (1 + waste%).

Worked example

Scenario: A 10 ft × 10 ft slab, 4 inches thick, one pour, 10% waste, at $150 per cubic yard.

Result: Raw volume = 10 × 10 × (4 ÷ 12) = 33.3 ft³; with 10% waste ≈ 1.36 yd³; estimated cost ≈ $204; about 74 sixty-pound bags or 56 eighty-pound bags.

How to interpret your result

The cubic yards figure is the waste-adjusted amount of concrete to order or mix. The bag counts are rounded up estimates for hand-mixing, and the cost is a rough ready-mix estimate at the price you entered. Actual project requirements vary with subgrade, form accuracy, and site conditions, so consider ordering a little extra.

Factors that can affect the result

  • Shape: slab, footing, and column each use a different volume formula.
  • Units: length is in feet, while thickness, footing width/depth, and column diameter are in inches, converted internally.
  • Waste allowance: the overage percentage is added on top of the raw volume.
  • Bag yields: bag counts use typical yields (0.45 ft³ per 60 lb bag, 0.6 ft³ per 80 lb bag) and are rounded up.

Limitations and assumptions

  • Bag counts and cost are estimates based on typical yields and a single price; actual yields and prices vary.
  • Does not account for irregular shapes, slopes, or reinforcement that change volume or cost.
  • The waste percentage is a planning buffer, not a guarantee against shortfalls on irregular pours.
  • Project requirements can vary; confirm quantities with your supplier before ordering.

Frequently asked questions

Related calculators

Methodology

The calculator computes the raw volume for the selected shape (converting inches to feet where needed), multiplies by the number of pours, converts to cubic yards (÷27), adds the waste percentage, and estimates bag counts from typical yields and cost from the price per yard.

Sources and references

  • Mathematical basis — volume uses standard rectangular and cylindrical formulas; bag yields (0.45 ft³ per 60 lb bag, 0.6 ft³ per 80 lb bag) are typical premix values and vary by product
Last reviewed: August 2026. Read our editorial policy.

Disclaimer: Results are provided for informational purposes and may vary depending on the values entered, the assumptions described above, and rounding. They are not a substitute for professional advice specific to your situation. Read the full disclaimer.