Volume Calculator

Calculate the volume of a box, sphere, or cylinder. Choose a shape, enter its dimensions, and see the volume instantly with the matching formula.

Volume

150

l × w × h

Who should use it: Students, builders, and anyone solving basic volume problems.

How to use this calculator

  1. 1Choose a shape: box, sphere, or cylinder.
  2. 2Enter the dimensions for the chosen shape.
  3. 3Review the volume and the formula used.

Understanding the inputs

ShapeThe shape to calculate: Box, Sphere, or Cylinder.
Length / RadiusFor a box enter the length; for a sphere or cylinder enter the radius.
Width / HeightFor a box enter the width; for a cylinder enter the height. Not required for a sphere.
Height (box)The height of a box. Required only for the box shape.

How the calculation works

The calculator applies the standard volume formula for the chosen shape. For a box it multiplies length by width by height. For a sphere it multiplies four-thirds by π by the radius cubed. For a cylinder it multiplies π by the radius squared by the height.

Box: l × w × h; Sphere: 4/3 × π × r³; Cylinder: π × r² × h

Worked example

Scenario: Box with length 10, width 5, and height 3.

Result: Volume = 10 × 5 × 3 = 150.

How to interpret your result

The volume is the amount of three-dimensional space inside the shape, expressed in cubic units. The formula shown next to the result tells you which dimensions were used. For spheres and cylinders, the radius is the distance from the center to the edge, and the volume grows quickly with the radius.

Factors that can affect the result

  • Shape choice: each shape uses a different formula, so pick the shape that matches your problem.
  • Units: the volume is in cubic units of whatever units you enter (for example cubic meters if you enter meters).
  • Radius vs diameter: enter the radius, not the diameter; for a sphere, doubling the radius increases the volume eightfold.

Limitations and assumptions

  • Supports boxes, spheres, and cylinders only; other shapes such as cones or pyramids are not included.
  • Reports volume only; it does not compute surface area.
  • Assumes regular shapes; irregular or truncated shapes are not supported.

Frequently asked questions

Related calculators

Methodology

The calculator applies the standard volume formula for the chosen shape: l × w × h for a box, 4/3 × π × r³ for a sphere, and π × r² × h for a cylinder.

Sources and references

  • Mathematical basis — the volume formulas for boxes, spheres, and cylinders are standard results of solid geometry; no external source is required
Last reviewed: August 2026. Read our editorial policy.

Disclaimer: Results are provided for informational purposes and may vary depending on the values entered, the assumptions described above, and rounding. They are not a substitute for professional advice specific to your situation. Read the full disclaimer.